Repository logo
 
Loading...
Project Logo
Research Project

Health and Technology Research Center

Authors

Publications

Culture media and sampling collection method for Aspergillus spp. assessment : tackling the gap between recommendations and the scientific evidence
Publication . Viegas, Carla; Dias, Marta; Carolino, Elisabete; Sabino, Raquel Filipa Pinheiro
Culturing is still the most widely used method for determining fungal growth. Thus, is important to identify the most suitable culture media to assess Aspergillus spp. The aim of this study was to analyze data obtained from previous studies, aiming at identifying the most suitable culture media (malt extract agar (MEA) or dichloran-glycerol agar (DG18) to assess Aspergillus spp. isolation and growth. This study was conducted by using environmental samples (n = 1153). Most of the active sampling methods (air samples) were impacted directly onto both culture media. As for passive sampling methods, fungi were extracted from environmental matrices inoculated onto both media. Overall, total Aspergillus counts were higher in MEA (n = 617, 53.5%) than in DG18 (n = 536, 46.5%). Regarding Aspergillus sections, significant associations were detected with the media (χ2 (7) = 241.118, p < 0.001), the sampling approach (p < 0.001, 95% CI = (0.3 × 10−4), and the indoor environment (p < 0.001, 95% CI = (0.3 × 10−4)). As such, sampling approach and the culture media should be accurately selected when dealing with Aspergillus spp. exposure assessment.
Development of a chlorhexidine delivery system based on dental reline acrylic resins
Publication . Bettencourt, Ana; Costa, Joana; Ribeiro, Isabel A. C.; Gonçalves, Lídia; Arias-Moliz, Maria Teresa; Dias, Juliana R.; Franco, Margarida; Alves, Nuno M.; Portugal, Jaime; Neves, Cristina B.
The high recurrence rate of common denture stomatitis after antifungal treatment is still concerning. This condition is caused by low patient compliance and incomplete local elimination of the main etiological factor — Candida albicans, often associated with other microorganisms, such as Streptococcus species. Impregnating denture materials with antimicrobials for local delivery is a strategy that can overcome the side effects and improve the efficacy of conventional treatments (topical and/or systemic). In this work, we describe the development of three hard autopolymerizing reline acrylic resins (Kooliner, Ufi Gel Hard, and Probase Cold) loaded with different percentages of chlorhexidine (CHX). The novel formulations were characterized based on their antimicrobial activity, mechanical, morphological and surface properties, in-vitro drug release profiles, and cytotoxicity. The addition of CHX in all resins did not change their chemical and mechanical structure. Among all the tested formulations, Probase Cold loaded with 5 wt% CHX showed the most promising results in terms of antimicrobial activity and lack of serious detrimental mechanical, morphological, surface, and biological properties.
Bioburden in sleeping environments from Portuguese dwellings
Publication . Viegas, Carla; Dias, Marta; Monteiro, Ana; Faria, Tiago; Lage, Joana; Carolino, Elisabete; Caetano, Liliana Aranha; Gomes, Anita Q.; Almeida, Susana Marta; Verde, Sandra Cabo; Belo, Joana; Canha, Nuno
A wider characterization of indoor air quality during sleep is still lacking in the literature. This study intends to assess bioburden before and after sleeping periods in Portuguese dwellings through active methods (air sampling) coupled with passive methods, such as electrostatic dust cloths (EDC); and investigate associations between before and after sleeping and bioburden. In addition, and driven by the lack of information regarding fungi azole-resistance in Portuguese dwellings, a screening with supplemented media was also performed. The most prevalent genera of airborne bacteria identified in the indoor air of the bedrooms were Micrococcus (41%), Staphylococcus (15%) and Neisseria (9%). The major indoor bacterial species isolated in all ten studied bedrooms were Micrococcus luteus (30%), Staphylococcus aureus (13%) and Micrococcus varians (11%). Our results highlight that our bodies are the source of the majority of the bacteria found in the indoor air of our homes. Regarding air fungal contamination, Chrysosporium spp. presented the highest prevalence both in after the sleeping period (40.8%) and before the sleeping period (28.8%) followed by Penicillium spp. (23.47% morning; 23.6% night) and Chrysonilia spp. (12.4% morning; 20.3% night). Several Aspergillus sections were identified in air and EDC samples. However, none of the fungal species/strains (Aspergillus sections Fumigati, Flavi, Nidulantes and Circumdati) were amplified by qPCR in the analyzed EDC. The correlations observed suggest reduced susceptibility to antifungal drugs of some fungal species found in sleeping environments. Toxigenic fungal species and indicators of harmful fungal contamination were observed in sleeping environments.
Development of RisObIn.Com, a screening tool for risk of childhood obesity in the community
Publication . Moreira, Ana Catarina; Oliveira, Patrícia; Borrego, Rute; Nogueira, Telma; Ferreira, Raquel; Virella, Daniel
The prevalence of childhood overweight has increased considerably in the past three decades and there is evidence that childhood obesity can persist into adulthood. A simple tool to identify relevant risk factors may alert families and prevent overweight and obesity. This study aims to develop a pre-school screening tool to assess the risk of childhood obesity. Child anthropometric measurements and several risk factors for childhood obesity factors were obtained. The effect of the variables on the outcome of obesity (defined as increased anthropometry-estimated adiposity) was assessed by binary logistic regression analyses. The identified variables were submitted for expert panel validation and combined for the tool development. A total of 304 children were included. Eight items were included in the tool. A higher score of the tool indicates a greater risk for obesity in childhood with the cutoff point set at 0. The tool sensitivity for obesity was 95%, specificity was 74.4%, the positive predictive value was 37.3%, and negative predictive value was 98.9%. The Risk of childhood Obesity In the Community (RisObIn.Com) tool is proposed to be a comprehensive tool to identify children at high risk for late childhood obesity at admission to primary school. Further studies are needed to assess the performance of the tool.
Effects of the ketogenic diet in the treatment of gliomas: a systematic review
Publication . Sargaço, Beatriz; Oliveira, Patrícia; Antunes, Maria Luz; Moreira, Ana Catarina
The ketogenic diet (KD) is a restrictive therapeutic diet, distinguished by being hyperlipidic, normoproteic, and hypoglucidic. This diet simulates biochemical changes related to fasting periods to achieve systemic ketosis. The metabolic particularities of glioma tumors motivated the rise in investigations and nutritional strategies, such as KD, to modulate the glycemic response as a treatment. This systematic review followed the PRISMA recommendations and was published in PROSPERO, with the identification CRD42021264173. The databases used were EMBASE, PubMed/Medline, Scopus, and Web of Science, and the studies were analyzed using the web-based application Rayyan. To analyze the risk of bias, Cochrane RevMan 5 software was used. For the analysis and treatment of statistical data, Microsoft® Excel® was used. A total of nine original articles were included. Data on survival, symptomology, and quality of life were collected. Mean overall survival was 15.9 months. Constipation and fatigue were the most reported symptoms. In 44.4% of the studies, an improvement in the quality of life was found. The KD is supported by most published studies as an effective therapy in the treatment of malignant gliomas due to its positive effects on patient survival. It was not possible to conclude the effectiveness of KD on quality of life.

Organizational Units

Description

Keywords

Contributors

Funders

Funding agency

Fundação para a Ciência e a Tecnologia

Funding programme

6817 - DCRRNI ID

Funding Award Number

UIDP/05608/2020

ID