Logo do repositório
 
Publicação

Tannin extracts as a preservative for pine thermomechanically densified wood

dc.contributor.authorNiela de Lima, Nídia
dc.contributor.authorCastro, Vinícius Resende de
dc.contributor.authorLopes, Nayara Franzini
dc.contributor.authorNunes, Ítalo Lima
dc.contributor.authorAndrade, Frances Alves
dc.contributor.authorZanuncio, Antonio José Vinha
dc.contributor.authorCarneiro, Angélica de Cassia Oliveira
dc.contributor.authorAraújo, Solange
dc.date.accessioned2023-10-10T13:48:34Z
dc.date.available2023-10-10T13:48:34Z
dc.date.issued2023
dc.description.abstractThermo-mechanical densification modifies wood to produce a more dense and resistant lignocellulosic material and may degrade extractives that contribute to the increased susceptibility of wood to attack by xylophagous organisms. This study evaluated the efficiency of tannin extracts of Acacia mearnsii in the treatment of thermo-mechanical densified pine wood in relation to physical, mechanical, and biological resistance (Cryptotermes brevis) properties. Pinus elliottii samples were pretreated with oxalic acid in a Parr reactor, then treated by diffusion in tannin solutions at concentrations 5, 10, and 15%, and finally hot pressed. The apparent density of the modified wood was 87.8% greater than that of the in natura wood (control) with tannins at 15%. The mechanical strength increased, especially the parallel compressive strength, which had an average increase of 169% for the wood with tannins at 10 and 15%, compared with the in natura wood. There was an increase in termite mortality and a reduction in damage for the modified wood treated with 15% tannins, obtaining the best results in mechanical and biological resistance and for the physical parameters. Thermal densification pine wood and preserved with tannin extractives proved to be a potential alternative as a high performance materialpt_PT
dc.description.versioninfo:eu-repo/semantics/publishedVersionpt_PT
dc.identifier.citationNiela de Lima, N. et al. Tannin extracts as a preservative for pine thermomechanically densified wood. BioResources, [s. l.], v. 18, n. 1, 2023, p. 641–652.pt_PT
dc.identifier.doi10.15376/biores.18.1.641-652pt_PT
dc.identifier.urihttp://hdl.handle.net/10400.5/28947
dc.language.isoengpt_PT
dc.peerreviewedyespt_PT
dc.publisherBioresourcespt_PT
dc.relationForest Research Centre
dc.relationForest Research Centre
dc.relationNot Available
dc.relation.publisherversionbioresources.compt_PT
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/pt_PT
dc.subjectbiodeteriorationpt_PT
dc.subjectthermo-mechanical densificationpt_PT
dc.subjectX-ray densitometrypt_PT
dc.subjectpreservativespt_PT
dc.subjecttanninspt_PT
dc.titleTannin extracts as a preservative for pine thermomechanically densified woodpt_PT
dc.typejournal article
dspace.entity.typePublication
oaire.awardNumberUID/AGR/00239/2019
oaire.awardNumberUIDB/00239/2020
oaire.awardNumberEXPL/CTM-PAM/0850/2021
oaire.awardNumberDL 57/2016/CP1382/CT0018
oaire.awardTitleForest Research Centre
oaire.awardTitleForest Research Centre
oaire.awardTitleNot Available
oaire.awardURIinfo:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/UID%2FAGR%2F00239%2F2019/PT
oaire.awardURIinfo:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/UIDB%2F00239%2F2020/PT
oaire.awardURIinfo:eu-repo/grantAgreement/FCT/3599-PPCDT/EXPL%2FCTM-PAM%2F0850%2F2021/PT
oaire.awardURIinfo:eu-repo/grantAgreement/FCT/DL 57%2F2016/DL 57%2F2016%2FCP1382%2FCT0018/PT
oaire.citation.issue1pt_PT
oaire.citation.titleBioResourcespt_PT
oaire.citation.volume18pt_PT
oaire.fundingStream6817 - DCRRNI ID
oaire.fundingStream6817 - DCRRNI ID
oaire.fundingStream3599-PPCDT
oaire.fundingStreamDL 57/2016
person.familyNameAraújo
person.givenNameSolange
person.identifier.orcid0000-0002-6100-5353
person.identifier.ridP-6986-2017
person.identifier.scopus-author-id36620885600
project.funder.identifierhttp://doi.org/10.13039/501100001871
project.funder.identifierhttp://doi.org/10.13039/501100001871
project.funder.identifierhttp://doi.org/10.13039/501100001871
project.funder.identifierhttp://doi.org/10.13039/501100001871
project.funder.nameFundação para a Ciência e a Tecnologia
project.funder.nameFundação para a Ciência e a Tecnologia
project.funder.nameFundação para a Ciência e a Tecnologia
project.funder.nameFundação para a Ciência e a Tecnologia
rcaap.rightsopenAccesspt_PT
rcaap.typearticlept_PT
relation.isAuthorOfPublication1ef3343e-5d8b-4bd7-8364-cbe104a86c6b
relation.isAuthorOfPublication.latestForDiscovery1ef3343e-5d8b-4bd7-8364-cbe104a86c6b
relation.isProjectOfPublication6a9ac754-44c8-4fda-854c-879148c1ac4e
relation.isProjectOfPublication56bd0ae9-f8da-4344-b9a2-f633d4f68b89
relation.isProjectOfPublicationa0e4cdd2-0569-4e2c-9db9-70a39a197aa5
relation.isProjectOfPublication53c3448d-38cb-4736-91ac-7423a1d32a67
relation.isProjectOfPublication.latestForDiscovery56bd0ae9-f8da-4344-b9a2-f633d4f68b89

Ficheiros

Principais
A mostrar 1 - 1 de 1
A carregar...
Miniatura
Nome:
BioRes_18_1_641_Lima_CLNAZCA_Tannic_Extracts_Pine_Thermomechan_Wood_20286.pdf
Tamanho:
442.17 KB
Formato:
Adobe Portable Document Format
Licença
A mostrar 1 - 1 de 1
Miniatura indisponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição: